How To Use Our Product Lines
How to use. . . Smart Relay
Configuring / Updating the Mode
3 min
configuring the mode the steps to configure or change the mode are as follows selecting the mode changing the dip switch settings restarting the device using the list above, it is important to consider what you want the smart relay to accomplish the most common or useful applications have been chosen and coded into the device if the required action or configuration is not available, this would then require custom code to be written for the smart relay and the device reprogrammed you can perform this upgrade on your own, or you can consult with us for assistance update the mode to change the mode of operation, do the following the changes will only come into effect after the smart relay has been restarted or power is lost and restored review the configuration table , and select the mode required the description provides information about how the mode will function read this carefully! using a small, thin screwdriver, move the dip switches into the correct positions to correspond with the code as described above before you reset the smart relay or remove power, review your cabling as the device will operate using the updated settings when it powers up rest smart relay or return power smart relay will now restart